I cheked in new EC code. The main chages are in ECHB bank,
that bicame longer then before (38 columns). I hope this configuration
will last longer. Before libraries will be built users should checout
EC to get things right.
Regards Stepan.
New ECHB :
!-----------------------------------------------------------------------
! BANKname BANKtype ! Comments
TABLE ECHB ! create write display delete ! Forward calorimeter result bank
!
! ATTributes:
! -----------
!COL ATT-name FMT Min Max ! Comments
!
1 Sect I 0 0xFFFF ! Sector number & Layer number
2 E__hit F 0.0 6.0 ! energy found
3 dE_hit F 0.0 6.0 ! error on the energy found
4 t_hit F 0.0 9999.0 ! time found
5 dt_hi F 0.0 9999.0 ! error time found
6 i_hit F 0.0 9999.0 ! sector rectangular coordinate
7 j_hit F 0.0 9999.0 ! sector rectangular coordinate
8 di_hit F 0.0 9999.0 ! sector rectangular coordinate error,
9 dj_hit F 0.0 9999.0 ! sector rectangular coordinate error,
10 x_hit F 0.0 9999.0 ! lab coordinate,
11 y_hit F 0.0 9999.0 ! lab coordinate,
12 z_hit F 0.0 9999.0 ! lab coordinate,
13 dx_hit F 0.0 9999.0 ! lab coordinate error,
14 dy_hit F 0.0 9999.0 ! lab coordinate error,
15 dz_hit F 0.0 9999.0 ! lab coordinate error,
16 u2_hit F 0.0 9999.0 ! second moment of u _hit pattern
17 v2_hit F 0.0 9999.0 ! second moment of v _hit pattern
18 w2_hit F 0.0 9999.0 ! second moment of w _hit pattern
19 u3_hit F -9999.0 9999.0 ! third moment of u _hit pattern
20 v3_hit F -9999.0 9999.0 ! third moment of v _hit pattern
21 w3_hit F -9999.0 9999.0 ! third moment of w _hit pattern
22 u4_hit F -9999.0 9999.0 ! forth moment of u _hit pattern
23 v4_hit F -9999.0 9999.0 ! forth moment of v _hit pattern
24 w4_hit F -9999.0 9999.0 ! forth moment of w _hit pattern
25 centr_U F 0.0 9999.0 ! peak position on U axis
26 centr_V F 0.0 9999.0 ! peak position on V axis
27 centr_W F 0.0 9999.0 ! peak position on W axis
28 path_U F 0.0 9999.0 ! path length from hit position to U axis
29 path_V F 0.0 9999.0 ! path length from hit position to V axis
30 path_W F 0.0 9999.0 ! path length from hit position to W axis
31 Nstrp_U I 0 36 ! Number of U strips in the hit
32 Nstrp_V I 0 36 ! Number of V strips in the hit
33 Nstrp_W I 0 36 ! Number of W strips in the hit
34 MatchID1 I 0 30 ! Id of matched hit in the layer1
35 CH21 F 0. 999. ! Quality measure of matching with layer1
36 MatchID2 I 0 30 ! Id of matched hit in the layer2
37 CH22 F 0. 999. ! Quality measure of matching with layer2
38 istat I 0 0xFFFF ! Number of hits & hit ID
!!
! For matching if current layer is WHOLE then layer1=INNER and layer2=OUTER
! if current layer is INNER then layer1=WHOLE and layer2=OUTER
! if current layer is OUTER then layer1=WHOLE and layer2=INNER
END TABLE
!