we finally got some more work disks on 2 new file servers (fs5,fs6):
/work/clas/calib -> /net/fs5/work2
/work/clas/gsim -> /net/fs5/work3
/work/clas/disk4 -> /net/fs6/work10
/work/clas/disk5 -> /net/fs6/work11
The partitions on the first file server (2x17GByte disks each)
should ONLY BE USED FOR SPECIAL PURPOSES: CALIBRATION and GSIM data.
I was asked to organize the usage of the /work/clas/calib disk(s).
In my opinion the disk space should be used by all detector groups
to place calibration data, ntuples, ... there.
If you do NOT put all the raw data files there you may use for your
calibrations but MAINLY the output files, the disk space should be
sufficient (at least for some time ;-)
If necessary I will start a script to clean up the partition
but I will send a mail before.
Have a nice evening
Franz
===============================================================
Franz J. Klein, Thomas Jefferson National Accelerator Facility,
12000 Jefferson Avenue MS 12H, Newport News, VA 23606
Email: fklein@jlab.org, Tel: (757)269-5879, Fax: (757)269-5800
---------------------------------------------------------------